Are you using the vape kit for the first time? It’s not difficult. Anyone can start using it if they are aware of the right procedure. There are a few settings that you may have to consider. You certainly may not be able to enjoy the very first drag, on your new device, unless it is set.
- New vape kits need proper settings for temperature and mouthpiece
- The pod is also empty and needs to be filled
- The coil needs to be adjusted so you get maximum benefits
Here you will find this guide helpful. If you are a new user, then this guide is best for you. Just follow the simple steps as your checklist.
You might have just bought a new device. But it is not ready for use. E liquid UK dealer will always give a complete device in the packing. It has to be adjusted so it meets your requirements and taste. Just remove the new device from the pack and check if everything is available.
You can compare the parts of the device from the menu provided along with the device box. Everything must be in place.
Prepare the tank
Just like a new car, the new vape kit also has an empty tank. This is where you may have to stuff the entire e-liquid. If you are using dry herb, then it has to be stuffed in the tank. This acts as the fuel that will burn to produce vapor.
You may have to fill the tank if you are using a traditional type vape kit. Vape pens are not the same. They mostly make use of refill type cartridges. Before lighting the pen or the vape kit, check if the e-liquid is filled to its maximum capacity.
The priming part
The vape kit has to be primed before you can use it. The task is not difficult. The kit has to be prepared so it can produce good quality vapor. This is also important so you get to enjoy the best flavor. For pen-type devices, the cotton pod must be completely soaked up with e-liquid.
Check with this procedure in advance. Once the vape kit is switched on, it will start burning the coil. This action produces heat. If the cotton pod is not completely soaked, then it gets burned out easily. If this happens, you may not be able to use the kit further.
Check with settings
Vape kits are heat-producing devices. So they may have to be adjusted to the most optimal temperature settings there are no other settings if you are using a starter kit. Quality Vape kit UK dealer can best guide you towards the most optimal settings, you need to maintain.
In case there are more settings it is best to go through the user manual before you switch on the device. Always keep in mind that, if the settings are perfect you get to enjoy the best vapor experience. The vape kit should be set to the best temperature settings. High-temperature will burn the coil. The low temperature will never produce any vapor. Always check the settings before using the device.